Vadovas Skil 3065 HA Gręžtuvas-suktuvas

Vadovas

9

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SAFETY INSTRUCTIONS FOR CORDLESS DRILL/

DRIVERS

1) SAFETY INSTRUCTIONS FOR ALL OPERATIONS

a) Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory or fastener may contact hidden wiring.

Cutting accessory and fasteners contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

2) SAFETY INSTRUCTIONS WHEN USING LONG DRILL

BITS

a) Never operate at higher speed than the maximum

speed rating of the drill bit. At higher speeds, the bit is

likely to bend if allowed to rotate freely without contacting

the workpiece, resulting in personal injury.

b) Always start drilling at low speed and with the bit

tip in contact with the workpiece. At higher speeds,

the bit is likely to bend if allowed to rotate freely without

contacting the workpiece, resulting in personal injury.

c) Apply pressure only in direct line with the bit and do

not apply excessive pressure. Bits can bend causing

breakage or loss of control, resulting in personal injury.

GENERAL

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Ensure that switch F2 is in the middle (locking) position

before making any adjustments or changing accessories

as well as when carrying or storing the tool

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage



power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) BATTERY TOOL USE AND CARE

a) 

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

b) 

battery packs. Use of any other battery packs may

create a risk of injury and re.

c) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact



contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged

Damaged or modied batteries may exhibit

unpredictable behaviour resulting in re, explosion or risk

of injury.

f) 

excessive temperature. Exposure to re or temperature

above 130°C may cause explosion.

g) Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

h) Charging

improperly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

6) SERVICE

a) 

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Skil 3065 HA Gręžtuvas-suktuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Skil. Jie gali pateikti originalų vadovą. Ar ieškote savo Skil 3065 HA Gręžtuvas-suktuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Skil Gręžtuvai-suktuvai vadovai
Daugiau Gręžtuvai-suktuvai vadovų

Dažnai užduodami klausimai apie Skil 3065 HA Gręžtuvas-suktuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Skil 3020 HD Gręžtuvas-suktuvas

Vadovas

Skil 3065 HC Gręžtuvas-suktuvas

Vadovas

Skil 3011 AA Gręžtuvas-suktuvas

Vadovas

Skil 3020 FA Gręžtuvas-suktuvas

Vadovas

Skil 3066 JA Gręžtuvas-suktuvas

Vadovas

Skil 3075 HC Gręžtuvas-suktuvas

Vadovas

Skil 3018 CA Gręžtuvas-suktuvas

Vadovas

Skil 3018 HC Gręžtuvas-suktuvas

Susijusios kategorijos