Vadovas Skil 3065 HA Gręžtuvas-suktuvas

Vadovas

8

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

A moment

of inattention while operating power tools may result in

serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) c) Prevent unintentional starting. Ensure the switch



source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch on

invites accidents.

d) d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in

personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

Any power tool that cannot be controlled

a

Brushless compact

drill/driver

3065

INTRODUCTION

• This tool is intended for tightening and loosening screws

and for drilling in wood,metal,ceramic and plastic.

• This tool is not intended for professional use.

• Read and save this instruction manual.3

TECHNICAL DATA 1

Max. torque for hard screwdriving application according to

ISO 5393 : 60 Nm

TOOL ELEMENTS 2

A Switch for on/o and speed control

B Ring for torque control

C Lock-position (clutch)

D Gear selector

E Ventilation slots

F Switch for changing direction of rotation

G WORKLIGHT button

H WORKLIGHT

9. ___

J Battery level indicator button

K Belt clip

L Integrated bit clip

M Strap xing

SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

- WARNING Read all safety warnings, instructions,



power tool. Failure to follow all instructions listed below may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mainsoperated (corded) power tool or battery-operated

(cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive



liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or grounded

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Skil 3065 HA Gręžtuvas-suktuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Skil. Jie gali pateikti originalų vadovą. Ar ieškote savo Skil 3065 HA Gręžtuvas-suktuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Skil Gręžtuvai-suktuvai vadovai
Daugiau Gręžtuvai-suktuvai vadovų

Dažnai užduodami klausimai apie Skil 3065 HA Gręžtuvas-suktuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Skil 3020 HD Gręžtuvas-suktuvas

Vadovas

Skil 3065 HC Gręžtuvas-suktuvas

Vadovas

Skil 3011 AA Gręžtuvas-suktuvas

Vadovas

Skil 3020 FA Gręžtuvas-suktuvas

Vadovas

Skil 3066 JA Gręžtuvas-suktuvas

Vadovas

Skil 3075 HC Gręžtuvas-suktuvas

Vadovas

Skil 3018 CA Gręžtuvas-suktuvas

Vadovas

Skil 3018 HC Gręžtuvas-suktuvas

Susijusios kategorijos