Vadovas Parkside IAN 291683 Gręžtuvas-suktuvas

Vadovas

Work area safety

1. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2. Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away

while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power

tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric shock if

your body is earthed or grounded.

3. Do not expose power tools to rain or

wet conditions. Water entering a power

tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep cord

away from heat, oil, sharp edges or

moving parts. Damaged or entangled

cords increase the risk of electric shock.

5. When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a

damp location is unavoidable, use

a residual current device (RCD)

protected supply. Use of an RCD reduces

the risk of electric shock.

Personal safety

1. Stay alert, watch what you are

doing and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the influence of drugs, alcohol

or medication. A moment of inattention

while operating power tools may result in

serious personal injury.

2. Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce

personal injuries.

3. Prevent unintentional starting.

Ensure the switch is in the off-position

before connecting to power source

and / or battery pack, picking up or

carrying the tool. Carrying power tools

with your finger on the switch or energising

power tools that have the switch on invites

accidents.

4. Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left attached to

a rotating part of the power tool may result in

personal injury.

5. Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power tool

in unexpected situations.

6. Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

7. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use

of dust collection can reduce dust-related

hazards.

Power tool use and care

1. Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will do

the job better and safer at the rate for which it

was designed.

2. Do not use the power tool if the

switch does not turn it on and off. Any

power tool that cannot be controlled with the

switch is dangerous and must be repaired.

3. Disconnect the plug from the

power source and / or the battery

pack from the power tool before

making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

8 GB

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Parkside IAN 291683 Gręžtuvas-suktuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Parkside. Jie gali pateikti originalų vadovą. Ar ieškote savo Parkside IAN 291683 Gręžtuvas-suktuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Parkside Gręžtuvai-suktuvai vadovai
Daugiau Gręžtuvai-suktuvai vadovų

Dažnai užduodami klausimai apie Parkside IAN 291683 Gręžtuvas-suktuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Parkside IAN 274864 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 280213 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 302394 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 312140 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 282444 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 302117 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 326374 Gręžtuvas-suktuvas

Vadovas

Parkside IAN 290315 Gręžtuvas-suktuvas

Susijusios kategorijos