Vadovas Kärcher G 7.180 Slėginis plovimo įrenginys

Vadovas

English 9

Scope of delivery

The scope of delivery for the appliance is shown on the

packaging. Check the contents for completeness when

unpacking. If any accessories are missing or in the

event of any shipping damage, please notify your deal-

er.

Safety devices

몇 CAUTION

Missing or modified safety devices

Safety devices are provided for your own protection.

Never modify or bypass safety devices.

High-pressure gun lock

The lock locks the lever of the high-pressure gun and

prevents the device from starting unintentionally.

Thermostat valve

The thermostat valve protects the pump from overheat-

ing. The water is

heated by the circulation operation.

The thermostat valve opens at a water temperature of

50 °C and releases hot water.

Symbols on the device

Device description

For the illustrations, refer to the graphics page

Illustration A

1 Detergent tank

2 Detergent filling hole

3 Detergent tank fastening screw

4 Quick coupling for high-pressure hose

5 Engine oil filling hole

6 Engine starter motor

7 High-pressure hose storage compartment

8 Plate

9 Transport handle

10 Storage / parking position for high-pressure gun

11 Rotary knob

12 Fuel tank filling hole

13 Power switch "0/OFF" / "I/ON"

14 Type plate

15 Water connection coupling with sieve

16 High-pressure gun

17 High-pressure gun lock

18 Button for separating the high-pressure hose from

the high-pressure gun

19 High-pressure hose

20 Spray lance with dirt grinder for stubborn soiling

21 Vario Power spray lance for common cleaning

tasks. The working pressure can be continuously in-

creased from "SOFT" to "HARD". To adjust the

working pressure, release the trigger gun lever and

turn the spray lance to the desired position. Deter-

gent can be added to the water jet when the spray

lance is turned all the way in the SOFT direction.

22 **Garden hose with commonly available coupling

– Fabric reinforced

– Diameter of at least 1/2 inch (13 mm)

– Length at least 7.5 m

** additionally required

Installation

For the illustrations, refer to the graphics page

Place the screws provided and matching screwdriver at

the ready.

Fit the supplied loose parts onto the device before start-

ing up the device.

Installing the detergent tank

1. Pull the free end of the detergent hose out from un-

der the device.

2. Fit the cap at the free end of the detergent hose onto

the hole in the detergent tank.

Illustration B

3. Push the detergent hose through the cap until it

reaches the bottom of the detergent tank.

4. Attach the detergent tank.

Illustration C

Installing the transport handle with plate

1. Fasten the plate to the upper section of the transport

handle.

Illustration D

2. Connect the upper and lower transport handle sec-

tions.

Illustration E

Starting up

1. Place the device on a flat and level surface.

2. Insert the high-pressure hose into the high-pressure

gun until it audibly latches into place.

Note

Take care to ensure the correct alignment of the nip-

ple.

Illustration F

3. Check for a secure connection by pulling on the

high-pressure hose.

4. Insert the high-pressure hose into the quick coupling

until it audibly latches into place.

Note

Take care to ensure the correct alignment of the nip-

ple.

Illustration G

5. Check for a secure connection by pulling on the

high-pressure hose.

6. Check the oil level and top up with oil if necessary

(see original operating instructions of the engine).

Illustration H

Do not aim the high-pressure jet may at

persons, animals, live electrical equipment

or the device itself.

Protect the device against frost.

The device may not be directly connected

to the public drinking water network

Risk of burns from hot surfaces.

Health risk from poisonous exhaust gases.

Never inhale the exhaust gases.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Kärcher G 7.180 Slėginis plovimo įrenginys vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Karcher. Jie gali pateikti originalų vadovą. Ar ieškote savo Kärcher G 7.180 Slėginis plovimo įrenginys vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Kärcher Slėginiai plovimo įrenginiai vadovai
Daugiau Slėginiai plovimo įrenginiai vadovų

Dažnai užduodami klausimai apie Kärcher G 7.180 Slėginis plovimo įrenginys

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Kärcher HD 5/17 CX Slėginis plovimo įrenginys

Vadovas

Kärcher HDS 8/18-4 C Slėginis plovimo įrenginys

Vadovas

Kärcher K 5 Full Control Slėginis plovimo įrenginys

Vadovas

Kärcher K 2 Premium Full Control Slėginis plovimo įrenginys

Vadovas

Kärcher HDS 7/16 CX Slėginis plovimo įrenginys

Vadovas

Kärcher K 4 Premium Power Control Slėginis plovimo įrenginys

Vadovas

Kärcher K7 Compact Slėginis plovimo įrenginys

Vadovas

Kärcher K4 Full Control Slėginis plovimo įrenginys

Susijusios kategorijos