Vadovas Haier HAMTCB56IRB1S Kaitlentė

Vadovas

Confirmation and Exit Power Management Function

For confirmation, turn off the hob. The power level will be saved automatically. Selected value is

permanently stored and remains even after power down of the main supply.

To change the power level repeat the operations described above.

NOTE: depending on the power management selection, some power levels and functions of the

cooking zones could be automatically limited not to exceed the selected value. In particular, in case

of a power management level set less than 4,5kw, Boost function, Varycook and some cooking

preparations with the app, could not be selected.

In particular last power level selection can be refused/adjusted according with the available amount

of residual power from the previous setting.

1

.3. CHOOSING THE

RIGHT COOKWARE

1

.3.1. Characteristics of

the cookware

Use only pots with

the induction s

ymbol.

Only pots with a perfectly flat bottom. Otherwise, the following situations may occur:

- No pot detection;

- Low performance;

- Unwanted noise.

Only pots with a smooth base, to avoid scratching the hob surface;

NOTE: avoid as much as possible moving pot operations on the glass surface just to minimize

scratches.

Magnet test

Induction cooking uses magnetism to generate heat; pots must therefore contain iron. If you

already have a cookware you can check if the material is magnetic by using a magnet. Pots are

suitable if they are

magnetically attracted by the magnet.

Cookwares made from the following materials are not suitable: pure stainless steel, aluminum or

copper without a magnetic base, glass, wood, porcelain, ceramic, earthenware.

1.3.2 Higher quality cookwares

All cookwares with the induction symbol are generally accepted.

Depending on the type of bottom, however, the behavior may vary.

When using large c

ookware with a smaller ferromagnetic element,

only the ferromagnetic element heats up. Consequently, heat

might not be uniformly distributed.

1.3.3. Dimension & placement

Always use the cooking zone that best matches the bottom diameter of the pan.

Place the pot making sure it is well centered in the cooking area.

NOTE: it's recommended not to use pans that exceed the perimeter of the cooking zone.

For the correct working of the hob, it's necessary to use pots with the bottom diameter inside the

range described in the following table.

06

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Haier HAMTCB56IRB1S Kaitlentė vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Haier. Jie gali pateikti originalų vadovą. Ar ieškote savo Haier HAMTCB56IRB1S Kaitlentė vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Haier Kaitlentės vadovai
Daugiau Kaitlentės vadovų

Dažnai užduodami klausimai apie Haier HAMTCB56IRB1S Kaitlentė

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Haier HAIFB53IRCS Kaitlentė

Vadovas

Haier HAMT68IRB1S Kaitlentė

Vadovas

Haier HA2MTCBP58IRB1S Kaitlentė

Vadovas

Haier HAVG6BF4TBPB Kaitlentė

Vadovas

Haier HAIFS954MCTT Kaitlentė

Vadovas

Haier HAMT66IRCS Kaitlentė

Vadovas

Haier HAFRSJ64MC Kaitlentė

Vadovas

Haier HA2MTCB58IRB1S Kaitlentė

Susijusios kategorijos