Vadovas FERM MSM1040 Diskinis pjūklas

Vadovas

6

EN

RADIAL MITRE SAW

MSM1040

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result in

electric shock, fire and/or serious injury. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Denotes risk of personal injury, loss of life

or damage to the tool in case of

nonobservance of the instruction in this

manual

Caution, risk of electric shock

Wear eye protection

Wear ear protectors. Exposure to noise

can cause hearing loss.

Wear a dust mask

Danger area! Keep hands, fingers or arms

away from this area.

Danger Area! Keep hands far away

(10cm) from the cutting area while the

machine is running. Danger of injury

when coming in conatct with the saw

blade

Do not direct the laser beam at persons or

animals and do not stare into the laser

beam yourself, not even from a distance.

This power tool produced laser class 2

laser radiation according to EN 60825-1.

This lead can lead to person being blinded

Disc dimensions. Observe the dimensions

of the saw blade.

Transport the machine only when the

machine is in inward transport position

SPECIFIC SAFETY INSTRUCTIONS

• Mitre saws are intended to cut wood or

wood-like products, they cannot be used

with abrasive cut-off wheels for cutting

ferrous material such as bars, rods, studs,

etc. Abrasive dust causes moving parts such

as the lower guard to jam. Sparks from abrasive

cutting will burn the lower guard, the kerf insert

and other plastic parts.

• Use clamps to support the workpiece

whenever possible. If supporting the

workpiece by hand, you must always keep

your hand at least 100 mm from either side

of the saw blade. Do not use this saw to

cut pieces that are too small to be securely

clamped or held by hand. If your hand is

placed too close to the saw blade, there is an

increased risk of injury from blade contact.

• The workpiece must be stationary and

clamped or held against both the fence

and the table. Do not feed the workpiece

into the blade or cut “freehand” in any way.

Unrestrained or moving workpieces could be

thrown at high speeds, causing injury.

• Push the saw through the workpiece. Do not

pull the saw through the workpiece. To make

a cut, raise the saw head and pull it out over

the workpiece without cutting, start the

motor, press the saw head down and push

the saw through the workpiece. Cutting on

the pull stroke is likely to cause the saw blade

to climb on top of the workpiece and violently

throw the blade assembly towards the operator.

• Never cross your hand over the intended

line of cutting either in front or behind the

saw blade. Supporting the workpiece “cross

handed” i.e. holding the workpiece to the right

of the saw blade with your left hand or vice

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo FERM MSM1040 Diskinis pjūklas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su FERM. Jie gali pateikti originalų vadovą. Ar ieškote savo FERM MSM1040 Diskinis pjūklas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi FERM Diskiniai pjūklai vadovai
Daugiau Diskiniai pjūklai vadovų

Dažnai užduodami klausimai apie FERM MSM1040 Diskinis pjūklas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

FERM MSM1035 Diskinis pjūklas

Vadovas

FERM CSM1019 Diskinis pjūklas

Vadovas

FERM MSM1038 Diskinis pjūklas

Vadovas

FERM COM1007P Diskinis pjūklas

Vadovas

FERM CSM1039 Diskinis pjūklas

Vadovas

FERM MSM1039 Diskinis pjūklas

Vadovas

Scheppach HM254 Diskinis pjūklas

Vadovas

Skil 3551 AB Diskinis pjūklas

Susijusios kategorijos