Vadovas Faber Beat DG Matt Gartraukis

Vadovas

3

1. SAFETY INFORMATION

For your safety and correct

operation of the appliance,

read this manual carefully before

installation and use. Always keep

these instructions with the ap-

pliance even if you move or sell

it. Users must fully know the

operation and safety features of

the appliance.

The wire connection has to

be done by specialized

technician.

• The manufacturer will not be

held liable for any damages

resulting from incorrect or im-

proper installation.

• The minimum safety distance

between the cooker top and

the extractor hood is 650 mm

(some models can be installed

at a lower height, please refer

to the paragraphs on working

dimensions and installation).

• If the instructions for installa-

tion for the gas hob specify a

greater distance, this must be

respected.

• Check that the mains voltage

corresponds to that indicated

ontheratingplatexedtothe

inside of the hood.

• Means for disconnection must

be incorporated in the xed

wiring in accordance with the

wiring rules.

• For Class I appliances, check

that the domestic power supply

guarantees adequate earthing.

• Connect the extractor to the

exhaustuethroughapipeof

minimum diameter 120 mm.

Therouteoftheuemustbe

as short as possible.

• Regulations concerning the dis-

chargeofairhavetobefullled.

• Do not connect the extractor

hood to exhaust ducts carrying

combustionfumes(boilers,re-

places, etc.).

• If the extractor is used in con-

junction with non-electrical

appliances (e.g. gas burning

appliances),asufcientdegree

of aeration must be guaranteed

in the room in order to prevent

the backow of exhaust gas.

When the cooker hood is used

in conjunction with appliances

supplied with energy other than

electric, the negative pressure in

the room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by

the cooker hood.

• The air must not be discharged

intoauethatisusedforex-

hausting fumes from appliances

burning gas or other fuels.

• If the supply cord is damaged, it

must be replaced from the man-

ufacturer or its service agent.

• Connect the plug to a socket

complying with current regula-

tions, located in an accessible

place.

• With regards to the technical

and safety measures to be

adopted for fume discharging

EN

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Faber Beat DG Matt Gartraukis vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Faber. Jie gali pateikti originalų vadovą. Ar ieškote savo Faber Beat DG Matt Gartraukis vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Faber Gartraukiai vadovai
Daugiau Gartraukiai vadovų

Dažnai užduodami klausimai apie Faber Beat DG Matt Gartraukis

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Faber Beat DB Matt Gartraukis

Vadovas

Faber Chloé Old Metal Gartraukis

Vadovas

Faber Beat BK Matt Gartraukis

Vadovas

Faber Chloé Old Brass Gartraukis

Vadovas

Faber Chloé Cast Iron Gartraukis

Vadovas

Faber Thea 80 DG Matt/SS Gartraukis

Vadovas

Faber Beat BK Gloss Gartraukis

Vadovas

Faber Chloé 70 CG Matt Gartraukis

Susijusios kategorijos