Vadovas EGO HT2401E Gyvatvorių pjoviklis

Vadovas

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E

5

EN

WORK AREA SAFETY

◾ Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

◾ Do not operate power tools in explosive

atmospheres, such as in the presence of

ammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

◾ Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

◾ Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk

of electric shock.

◾ Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

◾ Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

◾ Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

◾ When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

◾ If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

◾ Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

◾ Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

◾ Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your nger on the switch or

energizing power tools that have the switch on invites

accidents.

◾ Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

◾ Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

◾ Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

◾ If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

◾ Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and more safely at the rate for which

it was designed.

◾ Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

◾ Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

◾ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands of

untrained users.

◾ Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tools operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

◾ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control;

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo EGO HT2401E Gyvatvorių pjoviklis vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su EGO. Jie gali pateikti originalų vadovą. Ar ieškote savo EGO HT2401E Gyvatvorių pjoviklis vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi EGO Gyvatvorių pjovikliai vadovai
Daugiau Gyvatvorių pjovikliai vadovų

Dažnai užduodami klausimai apie EGO HT2401E Gyvatvorių pjoviklis

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

EGO HT2001E Gyvatvorių pjoviklis

Vadovas

EGO HT6500E Gyvatvorių pjoviklis

Vadovas

EGO HTX7500 Gyvatvorių pjoviklis

Vadovas

EGO HT2411E Gyvatvorių pjoviklis

Vadovas

EGO HTX5300-PA Gyvatvorių pjoviklis

Vadovas

EGO HT6510E Gyvatvorių pjoviklis

Vadovas

EGO HTX6500 Gyvatvorių pjoviklis

Vadovas

EGO HT2600E Gyvatvorių pjoviklis

Susijusios kategorijos