Vadovas Camry CR 7814 Šildytuvas

Vadovas

7

I.– temperature increase button

J.– temperature decrease button

K.– timer switch

5.Cord storage

6.Radiant ribs

7.Wheels

8.Remote control

ASSEMBLY (Fig. 2)

1. Turn the heater upside down.

2. Place the wheel bases between the first two ribs and end two ribs.

3. Use the U-shaped clamp to hook the bases.

4. Block the clamp by screwing on the butterfly nut.

5. Place the heater on the wheels.

CAUTION: After turning the heater, wait at least one hour before connecting it to a power outlet.

USING THE DEVICE

CAUTION: During first use of the heater a small amount of smoke may appear. This is normal.

1. Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants etc. on a flat and stable surface.

2. Make sure that all controls are set to off position. Connect the oil heater to mains power, press the power switch on (2) and then press

power on button (G) to start operation, press both again to stop operation. To turn off the device, press the power button (G) and then press

the power switch (2).

3. Power level setting

After power on the device press mode switch (H) on the control panel (4) to select desired power level low or medium or high by repeated

pressing. The display (3) will light up indicator A or B or C.

4. Temperature setting

The device has a thermostat which enables you to set the temperature from 15°C to 35°C. After setting the desired temperature on the

display of the device, the heating element will remain on until the room temperature reaches the desired temperature. The thermostat will

then cycle on and off to maintain the set room temperature.

Press buttons (I) or (J) on the control panel (3) or on the remote control (8) to set desired temperature in range 15°C - 35°C. The heating

element comes on again when the room temperature drops below the desired temperature.

5. Setting the timer

When the device is powered on. You can set the timer to switch off the appliance automatically after a certain period of time. Press the timer

button (K) several times to set the desired power off time (between 1 and 12 hours from the time the function is set). The display will show

00 and start flashing on the screen. The function will activate once the timer icon stops flashing. The heating element will cycle on and off

as per the set temperature setting and discontinue operation when the set time has run out.

CLEANING THE DEVICE

1. Prior to cleaning always remove the plug from the electrical outlet.

2. Prior to cleaning allow the heater to cool. Make sure that it is cool.

3. Wipe the heater with a damp cloth, then wipe dry.

4. Never use wax, shining agents or chemical agents to clean the heater. They may react with the device and cause discoloration or even

damage.

TECHNICAL DATA

Power source: 220-240V~50/60 Hz

Power levels: ( low / medium / high)

CR 7812: 600W / 900W / 1500W - 7 ribs

CR 7810: 800W / 1200W / 2000W - 9 ribs

CR 7813: 1000W / 1500W / 2500W - 11 ribs

CR 7814: 1000W / 1500W / 2500W - 13 ribs

Device is made in class I of insulation and has to be

connected only to power outlet with ground circuit.

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.

Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the

environment. Electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries

they should be delivered to dedicated points separatelly.

DEUTSCH

ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE

ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE

DIESE FÜR DIE ZUKUNFT AUF

Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Camry CR 7814 Šildytuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Camry. Jie gali pateikti originalų vadovą. Ar ieškote savo Camry CR 7814 Šildytuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Camry Šildytuvai vadovai
Daugiau Šildytuvai vadovų

Dažnai užduodami klausimai apie Camry CR 7814 Šildytuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Camry CR 7813 Šildytuvas

Vadovas

Camry CR 7753 Šildytuvas

Vadovas

Camry CR 7747 Šildytuvas

Vadovas

Camry CR 7715 Šildytuvas

Vadovas

Camry CR 7827 Šildytuvas

Vadovas

Camry CR 7721 Šildytuvas

Vadovas

Camry CR 7722 Šildytuvas

Vadovas

Camry CR 7718 Šildytuvas

Susijusios kategorijos