Vadovas AEG DD8625-M Gartraukis

Vadovas

6

The control switches are located on the

hood’s front panel:

1A

1B

1C

1D

1E

A. OFF – ON push button

Press once or more to obtain the

function desired:

ON: the hood switches on to the last

speed selected.

OFF: all the functions are switched off

except the illumination.

B. Speed selection push button (extraction

power).

Press this push button once or more

to select the most suitable extraction

speed (power) (1-2-3).

C. The display shows the extraction power

selected, signalling the saturation of the

fi lters F.

D. Intensive speed on/off. The Intensive

speed runs for 5 minutes:

If the hood is on when the Intensive

speed is activated, the hood reverts to

previous speed after 5 minutes.

If the hood is off when the Intensive

speed is activated, the hood will be

turned off after 5 minutes.

To interrupt the Intensive speed, press

button A or B.

E. Light ON/OFF

Should the hood or the controls fail to

operate: disconnect the power supply for at

least 5 seconds, then turn the hood back

on again.

Grease and charcoal fi lter maintenance

indicator

This hood is fi tted with a device that

indicates when maintenace of fi lters should

be done.

If the hood is to be used with a charcoal

fi lter, the saturation

indicator light must be enabled as follows:

Set the hood in “OFF”.

Pressing keys B and D simultaneously for

three seconds, LED F lights up and begins

to fl ash the 1st speed led. After 1 second

the 2nd speed led also fl ashes and the

system emits a sound signal (-Beep-) to

indicate setting taking place.

To remove the charcoal fi lter signal press

push buttons B and D simultaneously for 3

seconds. LED F lights up and begins to

fl ash the 1st speed led (grease fi lter) and

the 2nd speed led. After 1 second, only

the 1st speed led continues to fl ash. The

system emits a sound signal (-Beep-) to

indicate setting taking place.

Grease fi lter LED

The 1st speed led (+ led F) fl ashes, when it

is time to clean the grease fi lter.

Always comply with the maintenance

instructions for the grease fi lter.

Charcoal fi lter LED

The 2nd speed led (+ led F) fl ashes,

when the charcoal fi lter needs to be

cleaned or replaced.

Resetting the saturation indicator

After cleaning or replacing the fi lters, press

button A for 3 seconds until the 1st speed

led or the second speed led stops fl ashing.

The F LED also turns off.

LIGHTING

Disconnect the hood from the electricity.

Warning! Prior to touching the light bulbs

ensure they are cooled down.

Replace with a new 12 Volt, 20 Watt

(Maximum) halogen light made for a G-4

base SUITABLE FOR USE IN OPEN

LUMINAIRES. Follow package directions

and do not touch new light with bare hands.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo AEG DD8625-M Gartraukis vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su AEG. Jie gali pateikti originalų vadovą. Ar ieškote savo AEG DD8625-M Gartraukis vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi AEG Gartraukiai vadovai
Daugiau Gartraukiai vadovų

Dažnai užduodami klausimai apie AEG DD8625-M Gartraukis

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

AEG DPE5950M Gartraukis

Vadovas

AEG ADX6350AM Gartraukis

Vadovas

AEG DU4361-D Gartraukis

Vadovas

AEG X99384MV01 Gartraukis

Vadovas

AEG DIB3951M Gartraukis

Vadovas

AEG DPS5650AM Gartraukis

Vadovas

AEG DGB3523S Gartraukis

Vadovas

AEG DF4160-ML Gartraukis

Susijusios kategorijos