Vadovas Tefal GV5221E0 Easy Pressing Lygintuvas

Vadovas

7

PROBLEMS CAUSES SOLUTIONS

The generator does

not come on and

the thermostat light

is not illuminated.

The appliance is not switched

on.

Check that your appliance is

correctly plugged in

Water runs out of

the holes in the

soleplate.

Water has condensed in the

pipes because you are using

steam for the first time or you

have not used it for some time.

Press on the steam control button

away from your ironing board until

the iron produces steam.

The soleplate is not hot enough.

Wait for the thermostat light to go out

before activating the steam button.

Your thermostat is faulty: the iron

is not hot enough.

Contact an Approved Service Centre.

Water streaks

appear on the

linen.

Your ironing board is saturated with

water because it is not suitable for

use with a steam generator.

Check that your ironing board is

suitable.

Storing the generator

• Warning: do not touch the soleplate while still hot.

• Fold the carrying arm down onto the iron until it clicks into position, ensuring that your iron is

safely locked onto its housing (depending on model).

• Store the electrical cord in its storage place - fig.8.

• Storing the steam cord - fig.9.

• Leave the iron (and the iron rest) to cool down for 1 hour before storing it away.

Maintenance and cleaning

Before cleaning, ensure that your steam generator is unplugged and that the soleplate and the iron rest have coo-

led down.

Do not use detergent or descaling products for cleaning the soleplate or the base unit.

Never hold the iron or the base unit under the tap.

Cleaning the soleplate

• Regularly clean the soleplate with a non-metallic sponge.

Cleaning the unit

• Clean the plastic parts of the appliance occasionally with a soft dampened cloth.

Rinsing the boiler (once a month)

• Be careful : To extend the life of your boiler and to avoid the building up of scale, it

is essential that you rinse out the boiler at least after every 10 uses (approximately

once a month).

• Check that the generator is cold and unplugged for more than 2 hours.

• Using a jug, fill the boiler 3/4 full with untreated tap water- fig.10

• Shake the base unit for a few moments and then empty it completely over your

sink - fig.11.

• To obtain the best results, we advise you to repeat this operation.

A problem with your generator ?

If your water is hard,

increase the frequency.

In particular, do not use

descaling agents for

rinsing out the boiler, as

they could damage it.

1800115362 GV52XX TEFAL:110x154 16/06/09 15:16 Page 7

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Tefal GV5221E0 Easy Pressing Lygintuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Tefal. Jie gali pateikti originalų vadovą. Ar ieškote savo Tefal GV5221E0 Easy Pressing Lygintuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Tefal Lygintuvai vadovai
Daugiau Lygintuvai vadovų

Dažnai užduodami klausimai apie Tefal GV5221E0 Easy Pressing Lygintuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Tefal FV8062E0 Lygintuvas

Vadovas

Tefal GV9710M0 Lygintuvas

Vadovas

Tefal SV6111E1 Lygintuvas

Vadovas

Tefal GV9710G0 Lygintuvas

Vadovas

Tefal FV5770E0 Lygintuvas

Vadovas

Tefal FV5841U0 Lygintuvas

Vadovas

Tefal FV5699E0 Lygintuvas

Vadovas

Tefal FV9849Z0 Lygintuvas

Susijusios kategorijos