English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
STORING THE BLOWER
Clean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
Once the light on the charger turns solid green,
remove the battery from the charger and disconnect
the charger from the outlet.
Do not store the battery pack on the tool.
Never store batteries in a discharged condition. Wait
for battery pack to cool and fully charge immediately.
All batteries gradually lose their charge. The higher
the temperature, the quicker they lose their charge.
If you store your unit for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery pack life.
AIR VENTS
Never cover air vents. Keep them free of obstructions and
debris. They must always remain clear for proper motor
cooling.
MAINTENANCE
WARNING
electric shock, remove the battery pack before adjust-
ing, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.
Brush or blow dust and debris out of the air vents
using compressed air or a vacuum. Keep the air vents
free of obstructions, sawdust, and wood chips. Do not
spray, wash, or immerse the air vents in water.
Wipe off the housing and the plastic components
using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic
components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK
Store the battery pack charged.
Once the charging light turns green, remove the
battery from the charger and disconnect the charger
from the outlet.
Recharge the battery pack anytime you have notice
there is less power. Never let the battery pack become
completely discharged.
After charging, the battery pack may be stored in the
charger as long as the charger is not plugged in.
WARNING
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
SOLUTION
Motor fails to
start when
switch is
depressed.
Battery is
not secure.
Check to ensure the
latches are tightly
secured into place on
the back of the
blower and the battery.
Battery
is not
charged.
Charge the battery
pack according to the
instructions included
with your battery.
Unit will not
start.
Defective
power switch.
Return to place of
purchase or return the
unit to a repair center.
Unit will not
blow.
Blocked
tube.
Clear the blockage.
Cruise Control
Lever doesn't
work.
The screw
is loose.
Tighten the screw
with a phillips head
screwdriver.
3
Prisijunkite prie pokalbio apie šį produktą
Čia galite pasidalinti savo nuomone apie Powerworks P48AB Lapų pūstuvas. Jei turite klausimų, pirmiausia atidžiai perskaitykite vadovą. Užklausą dėl vadovo galite pateikti naudodami mūsų kontaktinę formą.