Vadovas Philips GC6704 Lygintuvas

Vadovas

10

Problem Possible cause Solution

The iron does not

produce any steam.

There is not enough water in

the water tank.

Fill the water tank beyond the MIN

indication. Press and hold the steam

trigger until steam comes out. It may

take up to 30 seconds until steam

comes out.

You did not press the steam

trigger.

Press and hold the steam trigger until

steam comes out.

The steam function has

been disabled until you have

performed the Calc-Clean

process.

Perform the Calc-Clean process to

restore the steam function. (see chapter '

Cleaning and maintenance')

At the start of your ironing

session, the steam trigger

has not been pressed long

enough.

Press and hold the steam trigger until

steam comes out. It may take up to 30

seconds until steam comes out.

You have set the temperature

dial to ●.

Steam is not available at ●. To use the

steam, set the temperature dial to ●● or

higher.

The light of the CALC-

CLEAN button ashes

and the appliance

beeps.

This is the Calc-Clean

reminder.

Perform the Calc-Clean after the Calc-

Clean reminder is given (see chapter

‘Cleaning and maintenance’).

No steam comes out of

the soleplate, the light

of the CALC-CLEAN

button ashes and the

appliance beeps.

You have not done or have

not completed the Calc-Clean

process.

Perform the Calc-Clean process to

enable the steam function again (see

chapter ‘Cleaning and maintenance’).

The appliance has

switched o.

The auto shut-o function is

activated automatically. The

appliance enters the standy

mode if it has not been used

for 15 minutes and switches

o if it has not been used for

another 10 minutes.

To swith on the appliance again, set the

on/o switch to “o” position and then

to “on” position.

The appliance produces

a loud pumping sound.

The water tank is empty. Fill the water tank with water and press

the steam trigger until the pumping

sound becomes softer and steam comes

out of the soleplate.

Water droplets come out

of the soleplate.

After the Calc-Clean process

remaining water may drip out

of the soleplate.

Wipe the soleplate dry with a piece of

cloth. If the Calc-Clean light still ashes

and the appliance still beeps, perform

the Calc-Clean process (see chapter

‘Cleaning and maintenance’).

The Calc-Clean process has

not been completed.

You have to perform the Calc-Clean

process again (see chapter ‘Cleaning and

maintenance’).

English

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Philips GC6704 Lygintuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Philips. Jie gali pateikti originalų vadovą. Ar ieškote savo Philips GC6704 Lygintuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Philips Lygintuvai vadovai
Daugiau Lygintuvai vadovų

Dažnai užduodami klausimai apie Philips GC6704 Lygintuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Philips GC7041 PerfectCare Viva Lygintuvas

Vadovas

Philips DST7030 Lygintuvas

Vadovas

Philips GC9540 PerfectCare Lygintuvas

Vadovas

Philips DST8050 Azur Lygintuvas

Vadovas

Philips DST7060 Lygintuvas

Vadovas

Philips GC9545 Lygintuvas

Vadovas

Philips GC8723 Lygintuvas

Vadovas

Philips GC9020 Lygintuvas

Susijusios kategorijos