Vadovas Philips GC6625 Lygintuvas

Vadovas

Safety auto-off mode (specic types only)

- To save energy, the steam generator switches off automatically when it has not been used for

15 minutes. The ‘iron ready’ light ashes.

- To reactivate the steam generator, set the on/off switch to ‘off’ position and then to ‘on’ position.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, visit www.philips.com/support

for a list of frequently asked questions or contact the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron does

not produce any

steam.

There is not enough water in

the water tank.

Fill the water tank beyond the MIN

indication. Press and hold the steam trigger

until steam comes out. It may take up to

30 seconds until steam comes out.

You have not pressed the steam

trigger.

Press and hold the steam trigger until

steam comes out.

You have set the temperature

dial to 1.

Turn the temperature dial to 2 or higher.

The steam function has been

disabled until you have

performed the Calc-Clean

process.

Perform the Calc-Clean process to restore

the steam function (see chapter

‘IMPORTANT - Cleaning and

maintenance’).

The Calc-Clean

light ashes and

the appliance

beeps.

This is the Calc-Clean reminder. Perform the Calc-Clean process within

1 hour after the Calc-Clean reminder

is given.

The Calc-Clean

light ashes and/

or the appliance

beeps.

You have not done or have not

completed the Calc-Clean

process.

Perform the Calc-Clean process to enable

the steam function again (see chapter

‘IMPORTANT - Cleaning and

maintenance’).

The Calc-Clean

light ashes and

the appliance

beeps every time

I press the steam

trigger. No steam

comes out of the

soleplate.

You have not done or have not

completed the Calc-Clean

process.

Perform the Calc-Clean process to enable

the steam function again (see chapter

‘IMPORTANT - Cleaning and

maintenance’).

The appliance has

switched off.

The safety auto-off function was

activated. This happens

automatically when the steam

generator has not been used or

the steam trigger has not been

pressed for more than 15

minutes.

Set the on/off switch to ‘off’ position and

then to ‘on’ position.

ENGLISH8

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Philips GC6625 Lygintuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Philips. Jie gali pateikti originalų vadovą. Ar ieškote savo Philips GC6625 Lygintuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Philips Lygintuvai vadovai
Daugiau Lygintuvai vadovų

Dažnai užduodami klausimai apie Philips GC6625 Lygintuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Philips GC9246 PerfectCare Lygintuvas

Vadovas

Philips DST7061 Lygintuvas

Vadovas

Philips GC6742 Lygintuvas

Vadovas

Philips GC4430 Lygintuvas

Vadovas

Philips GC9622 Lygintuvas

Vadovas

Philips DST8050 Azur Lygintuvas

Vadovas

Philips PSG2000 Lygintuvas

Vadovas

Philips PSG7130 Lygintuvas

Susijusios kategorijos