Vadovas Midea MDRD129FZE01 Šaldiklis

Vadovas

07

EN

Leveling feet

To avoid vibration, the unit must be leveled.

If required, adjust the leveling screws to compensate for the uneven floor.

The front should be slightly higher than the rear to aid in door closing.

Leveling screws can be turned easily by tipping the cabinet slightly.

Turn the leveling screws counterclockwise to raise the unit, clockwise to

lower it.

Connecting the appliance

After installing the appliance, connect the power plug into a socket outlet.

ATTENTION

After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you

put food into the appliance. If you add food before the appliance has cooled completely, your

food may spoil.

Tips for energy saving

• Do not place the appliance near cookers, radiators or other heat sources. If the

ambient temperature is high, the compressor will run more frequently and for longer,

resulting in increased energy consumption.

• Ensure that there is sucient ventilation at the base of the appliance, on the sides of

the appliance and at the back of the appliance. Never cover ventilation openings.

• Please also observe the spacing dimensions in the chapter “Installation”.

• The arrangement of drawers, shelves and racks as shown in the illustration oers the

most ecient use of energy and should therefore be retained as far as possible. All

drawers and shelves should remain in the appliance to keep the temperature stable

and save energy.

• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the

middle drawers can be removed. The top and bottom drawers and shelves should be

removed last if necessary.

• An evenly filled refrigerator/freezer compartment contributes to optimal energy use.

Therefore, avoid empty or half-empty compartments.

• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has

already cooled down increases energy eciency.

• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food

reduces the energy consumption in the refrigerator compartment and thus increases

the energy eciency.

• Open the door only as briefly as necessary to minimize cold loss. Opening the door

briefly and closing it properly reduces energy consumption.

• The door seals of your appliance must be perfectly intact so that the doors close

properly and energy consumption is not increased unnecessarily.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Midea MDRD129FZE01 Šaldiklis vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Midea. Jie gali pateikti originalų vadovą. Ar ieškote savo Midea MDRD129FZE01 Šaldiklis vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Midea Šaldikliai vadovai
Daugiau Šaldikliai vadovų

Dažnai užduodami klausimai apie Midea MDRD129FZE01 Šaldiklis

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Midea MDRC564FEE01 Šaldiklis

Vadovas

Midea MDRC207FEE01 Šaldiklis

Vadovas

Midea MDRC345FEE01 Šaldiklis

Vadovas

Midea MDRD99FZE01 Šaldiklis

Vadovas

Midea MDRU229FZE01 Šaldiklis

Vadovas

Midea MDRC280FEE01 Šaldiklis

Vadovas

Midea MDRC405FEE01 Šaldiklis

Vadovas

AEG TB7NA181EC Šaldiklis

Susijusios kategorijos