Vadovas Jonsered LM 2147 CM Vejapjovė

Vadovas

ENGLISH -

OPERATION

ENGINE ADJUSTMENTS (Fig.JI)

Refer to the engine manufacturer’s maintenance ma-

nual.

CAUTION:- Oil must be added to the

engine before use

STARTING THE ENGINE (Fig.J

II)

Once the machine has been set up properly, start the

engine as follows:

a)Operate the engine stop lever (14) to prepare the

engine for start, keep lever pressed against handle

while starting and using the machine (it operates the

engine brake).

b) Engines with primer system:

Press the fuel-enrichment pump (2) located on the car-

burettor 3 or 4 .semit

For further information and explanations, read carefully

the user instruction manual of the engine.

c) Start engine.

MANUAL STARTING: (While holding the engine stop

lever (14)).

Hold the engine start-grip (11) and pull the starter rope

gently until you feel the resistance caused by compres-

sion. Return the starter rope slowly then pull the handle

firmly towards you to it’s full extent

ELECTRICAL S

TARTING: (While holding the engine

stop lever (14)).

Insert the plug (G) in the socket (H) on the engine.

Turn the ignition key (16).

CAUTION: The blade starts turning as soon

as the engine is started.

Keep the engine stop lever (14) depressed during machine

operation. When the lever is released, the engine stops.

MOWING

To cut the grass, push the lawn mower manually or insert

the automatic advance gear.

How to insert automatic advance (Fig. J

III): Lift up the

clutch handle (17 - 18) and keep it pressed in position.

CAUTION: Engage the gear only when the

engine is running.

How to disengage advance: Release the clutch han-

dle.

Before pulling the machine towards you, disengage the

drive and push the machine forward approx 10 cm.

4

ADJUSTMENT OF CLUTCH CABLE (for self-propelled versions only)

Important: If, when you press the clutch lever, the automatic advance gear does not engage, the clutch cable should

be adjusted by inserting the spring (P) in one of the subsequent holes in the plate (R) or in the hole “S” .

MAINTENANCE

Caution! Switch off the motor and disconnect

the spark plug before undertaking any mainte-

nance work.

The lawn mower must be checked by a SERVICE

DEALER.

Cleaning under the bodywork

With machine at a standstill and off.

- Attach fitting (22) on the deck to the water supply tap.

Turn on the tap.

- start up the motor (blade in rotation), allowing it to

warm up for a few minutes.

- at the end of cleaning switch off the motor, turn off the

tap, detach the tube from the deck connection.

For a four stroke engine, check the oil level and change

the oil when dirty. For further explanation, see ENGINE

INSTRUCTION BOOK.

Frequently check the mower and ensure that all grass

deposits are removed from beneath the deck.

Never clean the mower by pouring water over it: this may

seriously damage the electric start system.

Take care, the exhaust muffler may be vaery hot.

Frequently check the blade for damage.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Jonsered LM 2147 CM Vejapjovė vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Jonsered. Jie gali pateikti originalų vadovą. Ar ieškote savo Jonsered LM 2147 CM Vejapjovė vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Jonsered Vejapjovės vadovai
Daugiau Vejapjovės vadovų

Dažnai užduodami klausimai apie Jonsered LM 2147 CM Vejapjovė

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Jonsered LM 2150 CMD Vejapjovė

Vadovas

Jonsered LM 2146 M Vejapjovė

Vadovas

Jonsered LM 2147 CMD Vejapjovė

Vadovas

Jonsered LM 2147 CMDAE Vejapjovė

Vadovas

Jonsered LM 2154 CMD Vejapjovė

Vadovas

Jonsered LM 2247 CDP Vejapjovė

Vadovas

Jonsered LM 2247 C Vejapjovė

Vadovas

Jonsered LM 2146 CMD Vejapjovė

Susijusios kategorijos