Vadovas Honeywell HT-112E Ventiliatorius

Vadovas

4

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions before using this fan.

2. Only use this fan as described in this manual. Other non-

recommended use may cause fire, electric shock, or injury.

3. Only connect the fan to a single-phase power socket with the

current as stated on its type plate.

4. Connect power after the fan has been fully assembled. Unplug

from outlet when moving fan from one location to another,

before putting on or taking off parts and before cleaning.

Disconnect the fan when not in use. Do not tug at the power cord

to disconnect the plug.

5. Supervision is needed when the fan is used anywhere near

children. This appliance is not intended for use by children or

other persons without assistance or supervision if their physical,

sensory or mental capabilities prevent them from using it safely.

6. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in

order to avoid a hazard.

7. Unwind the power cord completely. An incompletely unwound

power cord can lead to overheating and cause a fire. Do not touch

the power cord with wet hands. Position the power cord so that

nobody can trip over it and where the socket can be reached

easily.

8. Do not use an infinitely variable speed controller. This can lead

to overheating, fire, electric shock or faults in the appliance.

9. Do not operate the fan without the protective front and rear

grilles in position. Do not touch the rotating fan blades with any

part of the body. This can cause personal injury and damage.

10. Never insert fingers, pencils, or any other object through the

grille when fan is running.

11. Do not operate the fan if it is damaged or might be defective,

or if it is not working properly. Remove the power plug from the

socket.

12. Do not use the fan anywhere near easily inflammable gases or

substances such as solvents, lacquers, glues etc.

13. The fan is only designed for private use in indoor rooms and

is not intended for outdoor or for commercial use. Do not use the

fan anywhere near a bathtub, a shower or a swimming pool, or

anywhere else where water could splash.

14. Do not plunge the fan into water or any other liquids and do

not pour water or any other liquids over the fan.

15. Place the fan on a firm, even, dry surface. Be sure the fan is on

a stable surface when operating to avoid overturning. Make sure

the fan is standing securely so that it cannot tip over or fall down.

Maintain a safety distance of at least 50 cm from other objects.

16. Clean the fan regularly by following the cleaning instructions.

COMPONENTS

1. Front Grille

2. Spinner

3. Blades

4. Plastic Nut

5. Rear Grille

6. Motor Shaft

7. Speed Knob

8. Oscillating Clutch Knob

9. Motor Housing

10. Tilt Adjustment Knob

11. Power Supply Cord with Plug

12. Pedestal

13. Chassis

ASSEMBLY INSTRUCTIONS

Assembly of Fan Pedestal onto Chassis

1. Take the chassis and pedestal parts from the packing box

and unscrew the plastic nut on the pedestal (Fig. 1).

2. Insert the pedestal into the chassis by pushing

down until it locks into the chassis (Fig. 2).

3. Tighten the screw from the chassis to lock the

pedestal (Fig. 3).

Assembly of Blade and Grilles

1. Unscrew the spinner clockwise and the nut counter-clockwise,

then remove both of them (Fig. 4).

2. Place the rear grille on the motor shaft so that the handle is at

the top

3. Screw on plastic nut clockwise to attach rear grille tightly.

4. Remove and discard the small plastic sleeve on the motor shaft.

5. Install the blade onto the motor shaft until it reaches the

retaining pin (Fig. 5).

6. Make sure the fan blade slot fits into the retaining pin of the

motor shaft, then tighten the spinner counter-clockwise.

7. Secure both grilles firmly by tightening the screws. 1 Screw and

2 clips for HT-112E, 1 screw and 4 clips for HT-116E (Fig. 6).

HT-112-116_OM.indd 4 1/10/07 8:42:15 AM

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Honeywell HT-112E Ventiliatorius vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Honeywell. Jie gali pateikti originalų vadovą. Ar ieškote savo Honeywell HT-112E Ventiliatorius vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Honeywell Ventiliatoriai vadovai
Daugiau Ventiliatoriai vadovų

Dažnai užduodami klausimai apie Honeywell HT-112E Ventiliatorius

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Honeywell HT-216E Ventiliatorius

Vadovas

Honeywell HS-1040RE Ventiliatorius

Vadovas

Honeywell HT-700PE Ventiliatorius

Vadovas

Honeywell HT-700WBE Ventiliatorius

Vadovas

Honeywell HT-700BCE Ventiliatorius

Vadovas

Honeywell HT-116E Ventiliatorius

Vadovas

Honeywell HO-5500RE Ventiliatorius

Vadovas

Honeywell HT-700BE Ventiliatorius

Susijusios kategorijos