Vadovas Greenworks GD60CS40 Grandininis pjūklas

Vadovas

1 DESCRIPTION

1.1 PURPOSE

This chainsaw is designed for cutting branches, trunks, logs

and beams of a diameter determined by the cutting length of

the guide bar. It is only designed to cut wood.

It is only to be used in an outdoor, domestic application by

adults.

Do not use the chainsaw for any purpose not listed above.

This chainsaw is not to be used for professional tree services.

It is not to be used by children or by persons not wearing

adequate personal protective equipment and clothing.

1.2 OVERVIEW

Figure 1-22

1

Guide bar cover

2

Front handle guard /

chain brake

3

Front handle

4

Lock out button

5

Trigger

6

Oil tank cap

7

Oil indicator

8

Spike bumpers

9

Saw chain

10

Guide bar

11

Wrench

12

Rear handle

13

Chain tension screw

14

Chain cover

15

Chain cover nuts

16

Bolt for saw chain

tension

17

Sprocket

18

Battery release button

19

Oil outlet

20

Bar groove

21

Chain drive links

22

Cutter

23

Felling direction

24

Danger zone

25

Escape route

26

Direction of fall

27

Notch

28

Felling back cut

29

Hinge

30

Limb cut

31

Keep work off

ground leave support

limbs until log is cut

32

Log supported along

the entire length

33

Cut from top (over

buck) avoid cutting

earth

34

Log supported one

end

35

Under buck

36

Over buck

37

Log supported both

ends

38

Bucking a log

39

Stand on uphill side

when cutting because

log may roll

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

WARNING

Do not change or make accessories that are not

recommended by the manufacturer.

WARNING

Do not put in the battery pack until you assemble all the

parts.

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine before

use.

WARNING

• If the parts are damaged, do not use the machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the service

center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with local

regulations.

3.2 ADD THE BAR AND CHAIN

LUBRICANT

Examine the amount of oil in the machine. If the oil level is

low, add the bar and chain lubricant as follows.

IMPORTANT

Use bar and chain lubricant that is only for chains and chain

oilers.

NOTE

The machine comes from the factory without bar and chain

lubricant.

1. Loosen and remove the cap from the oil tank.

2. Put the oil into the oil tank.

3. Monitor the oil indicator to make sure that no dirt in the

oil tank while you add the oil.

4. Put the oil cap on.

5. Tighten the oil cap.

6. The whole oil tank will last for 15 - 40 minutes.

5

English

EN

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Greenworks GD60CS40 Grandininis pjūklas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Greenworks. Jie gali pateikti originalų vadovą. Ar ieškote savo Greenworks GD60CS40 Grandininis pjūklas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Greenworks Grandininiai pjūklai vadovai
Daugiau Grandininiai pjūklai vadovų

Dažnai užduodami klausimai apie Greenworks GD60CS40 Grandininis pjūklas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Greenworks G40CS30 Grandininis pjūklas

Vadovas

Greenworks GD40CS18 Grandininis pjūklas

Vadovas

Greenworks G24CS25 Grandininis pjūklas

Vadovas

Greenworks CD40CS15 Grandininis pjūklas

Vadovas

Greenworks GD40TCS Grandininis pjūklas

Vadovas

Greenworks GD40CS40 Grandininis pjūklas

Vadovas

Deltafox DG-CCS 1825 Grandininis pjūklas

Vadovas

EGO CS1800E Grandininis pjūklas

Susijusios kategorijos