Vadovas FERM MSM1035 Diskinis pjūklas

Vadovas

5

EN

10. Locking knob

11. Locking paddle

12. Knob over sliding support

13. Connection dust bag

14. Bevel angle

15. Handle

16. Cover

17. Saw blade bolt

18. Flange

19. Screw

20. Screw retraction arm

21. Extension pieces (left and right)

22. Lock-button saw blade

23. Angle indicator

24. Support bracket

2. SAFETY INSTRUCTIONS

By using electric tools basic safety precautions

should always be followed to reduce the risk of

fire. Electrical shock and personal injury.

Always read the specific product instruction

manual and the safety instructions before

attempting to operate the power tool and store

these instructions.

Install of a stationary machine.

Fig. 6

This machine is a stationary machine and for

safety reasons must always be firmly installed and

not used for mobile applications.

You can install the machine in two ways:

a) As a stationary machine on a workbench.

In case the machine must be secured to the

workbench with 4 bolts

b) As a stationary machine on a sub frame. In this

case the machine must be secured to the sub

frame with 4 bolts and the sub frame anchored

with 4 bolts to the floor plate with dimensions

of at least 1 square meter

Symbols

The following symbols are important for the

operations of your power tool. The correct

interpretations of the symbols helps you operate

the power tool more save

Denotes risk of personal injury, loss of life

or damage to the tool in case of

nonobservance of the instruction in this

manual

Caution, risk of electric shock

Keep bystanders away

Wear eye protection

Wear ear protectors. Exposure to noise

can cause hearing loss.

Wear a dust mask

Danger Area! Keep hands far away

(10cm) from the cutting area while the

machine is running. Danger of injury when

coming in conatct with the saw blade

Do not direct the laser beam at persons

or animals and do not stare into the laser

beam yourself, not even from a distance.

This power tool produced laser class 2

laser radiation according to EN 60825-1.

This lead can lead to person being

blinded

Disc dimensions. Observe the

dimensions of the saw blade. The hole

diameter must match the tool spindle

without play. *Use only a fill ring which is

specified by supplier, filling ring may not

have any play

Tranport the machine only when the

machine is in inward transport position

1. Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes

c) Keep children and bystanders far away while

operation a power tool. Distractions can cause

you to lose control, or material can shut away

d) Never leave the machine unattended without

first disconnecting it from the mains voltage.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo FERM MSM1035 Diskinis pjūklas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su FERM. Jie gali pateikti originalų vadovą. Ar ieškote savo FERM MSM1035 Diskinis pjūklas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi FERM Diskiniai pjūklai vadovai
Daugiau Diskiniai pjūklai vadovų

Dažnai užduodami klausimai apie FERM MSM1035 Diskinis pjūklas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

FERM MSM1038 Diskinis pjūklas

Vadovas

FERM MSM1039 Diskinis pjūklas

Vadovas

FERM CSM1019 Diskinis pjūklas

Vadovas

FERM MSM1040 Diskinis pjūklas

Vadovas

FERM CSM1039 Diskinis pjūklas

Vadovas

FERM COM1007P Diskinis pjūklas

Vadovas

Parkside IAN 315014 Diskinis pjūklas

Vadovas

FEMI TR 235 Diskinis pjūklas

Susijusios kategorijos