Vadovas Facom V.770F Tiesinis pjūklas

Vadovas

IMPORTANT SAFETY INFORMATION ENCLOSED.

READ THIS MANUAL BEFORE OPERATING MACHINE.

IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL INTO THE HANDS OF THE OPERATOR.

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.

EN

WARNING

GETTING STARTED WITH THE MACHINE

• THE SAWS ARE ONLY FOR CUTTING METAL AND ALLOY AND ALLOYS.

FACOM WILL NOT BE LIABLE IF THE MACHINE IS USED FOR ANY OTHER PURPOSE.

THIS MACHINE HAS NOT BEEN DESIGNED TO BE USED IN AN EXPLOSIVE ATMOSPHERE.

This machine and its accessories must be used in compliance with these instructions.

Using it for any other purpose may cause a risk of danger for people and the

environment.

• Always operate, inspect and maintain this machine in accordance with all

regulations (local, state, federal and country), that may apply to hand held/

hand operated pneumatic machine.

• For safety, top performance, and maximum durability of parts, operate this

machine at 90 psig (6.2 bar/620 kPa) maximum air pressure at the inlet with

3/8” (10 mm) inside diameter air supply hose.

• Exceeding the maximum pressure of 6.2 bar will lead to the risk of danger such as

excessive speed, breaking parts, higher torque or force that may destroy the machine

and its accessories or the part being worked on.

• Be sure all hoses and fittings are the correct size and are tightly secured.

• Always use clean dry and lubricated air at 90 psig maximum air

pressure. Dust, corrosive fumes and/or excessive moisture can ruin the

motor of an air machine.

• Do not lubricate machine with flammable or volatile liquids such as

kerosene, diesel or petrol.

• Do not remove any labels. Replace any damaged label.

• The use of a hose whip is recommended.

A coupler connected directly to the air inlet increases tool bulk and

decreases tool maneuverability.

• The pneumatic machine must be fitted and connected to the compressed

air network via quick disconnects to facilitate shutdown in the event of

danger.

• When the life of the tool has expired, it is recommended that the

machine be disassembled, degreased and parts be separated by material

so that they can be recycled.

USING THE MACHINE

• Before using the machine, check that there is no dangerous interaction with the

immediate environment (explosive gas, inflammable or dangerous liquid, unknown

piping, electric sheathing or cable, etc).

• Before connecting the machine to the air inlet, check the trigger is not blocked

in the on position by an obstacle and no adjustment or assembly tool is still in

position.

• Check the machine is connected to the network by a quick disconnect joint and

that an air braker valve is close by to shut the air down immediately in the event

of blockage, breakage or any other incident.

• Keep hands, loose clothing and long hair away from rotating end of

machine.

•

Check the position of the inversion system before starting the machine.

• Anticipate and be alert for sudden changes in motion during start up

and operation of any power machine.

•

Ensure that the unit on which the work is being carried out is immobilised.

• In the event of blockage, release the trigger and disconnect the machine

from the compressed air network.

• Use accessories recommended by FACOM.

•

The use of other than genuine

FACOM

replacement parts may result in safety

hazards, decreased machine performance, and increased maintenance, and

cancel all warranties.

Repairs should be made only by authorized trained personnel. Consult your

nearest

FACOM

Authorized Servicenter.

Do not use damaged, frayed or deteriorated air hoses and fittings.

Air powered machine can vibrate in use. Vibration, repetitive

motions or uncomfortable positions may be harmful to your hands

and arms. Stop using any machine if discomfort, tingling feeling

or pain occurs.

Seek medical advice before resuming use.

Do not carry the machine by the hose.

Keep body stance balanced and firm. Do not overreach

when operating this machine.

Do not use the machine under the influence of drugs, alcohol,

medication or if you are tired.

Use protective equipment such as glasses, gloves, safety shoes as

well as acoustic protection.

Remain vigilant, use common sense and pay attention when using

the machine.

Always turn off the air supply and disconnect the air

supply hose before installing, removing or adjusting

any accessory on this machine, or before performing any

maintenance on this machine.

When working with certain materials, exposure to dust may be

dangerous for health.

Get information on the composition of the material you are

working on and use suitable protective equipment. If in doubt, use

as much protection as possible.

Ensure that the blades are in good condition and have no defects

or cracks.

WARNING

NU-V.770F_0815.indd 5 8/4/2015 11:57:53 AM

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Facom V.770F Tiesinis pjūklas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Facom. Jie gali pateikti originalų vadovą. Ar ieškote savo Facom V.770F Tiesinis pjūklas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Facom Tiesiniai pjūklai vadovai
Daugiau Tiesiniai pjūklai vadovų

Dažnai užduodami klausimai apie Facom V.770F Tiesinis pjūklas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

AEG USE 600 Tiesinis pjūklas

Vadovas

FERM RSM1017 Tiesinis pjūklas

Vadovas

Scheppach CRS450-20ProS Tiesinis pjūklas

Vadovas

Skil 3470 AA Tiesinis pjūklas

Vadovas

Ryobi ERS-80V Tiesinis pjūklas

Vadovas

AL-KO JS 2015 Tiesinis pjūklas

Vadovas

Skil 3480 CA Tiesinis pjūklas

Vadovas

Skil 4900 AK Tiesinis pjūklas

Susijusios kategorijos