Vadovas Defort DJS-625N-Q Pjūklelis

Vadovas

5

Jig saw

INTENDED USE

This tool is intended for making cut-throughs and cut-

outs in wood, plastic, metal, ceramic plates and rubber,

and is suitable for straight and curved cuts at 0° or 45°.

TECHNICAL SPECIFICATIONS

1

PRODUCT ELEMENTS 2

1. Switch for on/off

2. Button for switch locking

3. Wheel for adjusting sawing speed

4. Lever for selecting sawing mode

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

fi re and/or serious injury.

 Always keep the cord away from moving parts of

the tool

 If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug

 Never use tool when cord is damaged; have it

replaced by a qualifi ed person

 Do not cut material containing asbestos

 Do not use a saw blade which is cracked, deformed

or dull

 Keep hands away from the saw blade while the tool

is in use

 Remove all obstacles on top of as well as under-

neath the cutting path before you start cutting

 Always disconnect plug from power source before

making any adjustment or changing any accessory

● Wear a dust protection mask when working with

materials which produce dust that is detrimental

to health; inform yourself beforehand about the

materials to be worked on

 Wear protective goggles when working with materi-

als which produce chips

 Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start cutting

 Check the functioning of the tool before each use

and, in case of a defect, have it repaired immediately

by a qualifi ed person; never open the tool yourself

 Always check that the supply voltage is the same

as the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be con-

nected to a 220V supply)

 When used outdoors, connect the tool via a fault

current (FI) circuit breaker with a triggering current

of 30 mA maximum, and only use an extension cord

which is intended for outdoor use and equipped with a

splash-proof coupling-socket

 The noise level when working can exceed 85

dB(A); wear ear protection

 When you put away the tool, switch off the motor

and ensure that all moving parts have come to a com-

plete standstill

 SBM Group can assure fl awless functioning of the

tool only when original accessories are used

 Use completely unrolled and safe extension cords

with a capacity of 16Amps (U.K. 13 Amps)

 In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the plug

 This tool should not be used by people under the

age of 16 years

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

 Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

 If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left unat-

tended

Your machine is double insulated in ac-

cordance with EN 50144; therefore no

earthwire is required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

Lubricate the saw blade guide regularly.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Defort DJS-625N-Q Pjūklelis vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Defort. Jie gali pateikti originalų vadovą. Ar ieškote savo Defort DJS-625N-Q Pjūklelis vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Defort Pjūkleliai vadovai
Daugiau Pjūkleliai vadovų

Dažnai užduodami klausimai apie Defort DJS-625N-Q Pjūklelis

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Defort DJS-725N-L Pjūklelis

Vadovas

Defort DJS-615N-Q Pjūklelis

Vadovas

Defort DJS-505-B Pjūklelis

Vadovas

Defort DJS-615N Pjūklelis

Vadovas

Defort DJS-625N Pjūklelis

Vadovas

Parkside IAN 270827 Pjūklelis

Vadovas

Parkside IAN 302616 Pjūklelis

Vadovas

Graphite 58G061 Pjūklelis

Susijusios kategorijos