Vadovas Blaupunkt SSP501 Lygintuvas

Vadovas

5

1. Steam hose

2. Temperature and steam control knob

3. Steam burst button

4. Indicator light

5. Iron soleplate

6. Iron base

7. Iron lock release button

8. Iron lock button

9. Removable water tank

10. Main power cord

11. "ECO" mode button

12. On/Off button

13. Self-clean function button

FILLING THE WATER TANK

Before filling the water tank, ensure that the steam station is unplugged from the power source. To

remove the water tank, hold the iron base with one hand and gently pull out the tank with the other

hand. Then, fill the tank by pouring water through the designated opening. Do not exceed the

maximum level (1.5 L).

IRONING

After filling the water tank, connect the steam station to the power source. Turn on the steam station

by pressing the On/Off button (12). Set the desired temperature and steam output using the control

knob (2) – with one dot, only temperature is active, while steam is released from two dots onwards.

When the indicator light (4) stops flashing and stays steady, you can begin ironing. Press the steam

burst button (3) to release steam from the iron. After finishing ironing, turn off the steam station by

pressing and holding the On/Off button (12) for 3 seconds.

TURNING OFF THE STEAM STATION

To turn off the steam station, press and hold the On/Off button (12) for 3 seconds. Then, unplug the

steam station from the power source.

ECO FUNCTION

Using the ECO mode (reduced steam output) allows you to save energy without compromising ironing

performance. To activate ECO mode, press the ECO button (11). The button should light up green. To

turn off ECO mode, press the ECO button (11) again. The green ECO indicator will turn off.

EXTRA STEAM BURST FUNCTION

If additional steam output is needed, press the steam burst button (3) twice. The iron will release an

increased amount of steam, then return to the regular steam level.

AUTOMATIC SHUTDOWN FUNCTION

The iron has an automatic shut-off function when left idle for 10 minutes. The indicator light (4) will

turn off, and the On/Off button (12) will start flashing. To resume ironing, press the On/Off button (12).

Before starting, wait for the indicator light to glow steadily, then press the steam burst button (3) to

begin ironing.

CLEANING AND MAINTENANCE

Never immerse the iron or steam station in water. Ensure that both the iron and the station have cooled

down. Wipe the body of the iron and station with a slightly damp cloth, then dry it. Wipe the iron

soleplate (5) with a soft cloth.

Depending on water hardness, the iron's cleaning mode should be activated every 1–3 months. Water

from the tank will be flushed through the iron’s steam channels at a high temperature. To do this, place

the steam station near a sink. Fill the water tank. Plug in the steam station and turn it on. Wait until it

reaches operating temperature (the indicator light will glow steadily). Hold the iron over the sink.

SSP501

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Blaupunkt SSP501 Lygintuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Blaupunkt. Jie gali pateikti originalų vadovą. Ar ieškote savo Blaupunkt SSP501 Lygintuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Blaupunkt Lygintuvai vadovai
Daugiau Lygintuvai vadovų

Dažnai užduodami klausimai apie Blaupunkt SSP501 Lygintuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.