Vadovas Beper P204FER005 Lygintuvas

Vadovas

Steam Iron Use Instructions

12

Always choose the most suitable temperature for the cloth to iron.

Do not use the iron as a heater. Do not subject the iron to shocks.

Before cleaning, always unplug the power cord.

If you decide not to use the product any longer, you must place it

away from children and in order not to create any danger.



1. Water tank

2. Thermostat

3. Power cord

4. Water spray button

5. Steam burst button

6. Continuous steam button

7. Tank lid

8. Soleplate

9. Self-clean button

10. Spray nozzle

11. Power indicator light





After preparing the necessary ironing materials, unwind the power cord and ensure it is free of knots or tangles.

Check that there is water in the tank; if you want to use steam, ll the tank with water (see the relevant section).

Set the thermostat to the “MIN” position.

Fill the tank with sufcient water. Never exceed the MAX level.

Place the iron vertically, without allowing the soleplate to come into contact with objects or other objects.

Plug the plug into the electrical outlet.

Set the thermostat to the desired temperature, referring to the symbols on the thermostat.

At this point, you can start ironing.



To enable steam, make sure the continuous steam button is set to the position . When using the iron for the

rst time, press the steam button several times to expel any impurities that have accumulated inside the holes

during the iron’s construction.

Steam ironing is possible by adjusting the thermostat from the “SILK” position to the maximum “LINEN” position.

The power light will come on, and when the soleplate is at the temperature required for steam release, it will go

out.

Press the steam button and steam will be released.

To use the steam shot function, set the temperature control dial to at least the “MAX” position.

Respect a 5-second interval between each steam shot.

If the steam shot button is pressed before the set temperature is reached, the water will not be vaporized but will

drip from the soleplate; this can cause ironing stains on the garment.

Excessive pressure (more than 5 seconds) on the steam button may cause water to leak from the holes in the

soleplate.

When nished, place the iron upright and unplug it from the electrical outlet.

The iron must be kept in constant motion over the fabric to be ironed.

After ironing, always empty the water tank after unplugging it from the electrical outlet.







Set the steam control to the position to prevent steam from escaping. Adjust the soleplate temperature by

turning the thermostat.

 

Do not iron

Synthetics, nylon, acrylic, and polyester cloths

Wool, Silk

Cotton and linen cloths

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Beper P204FER005 Lygintuvas vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Beper. Jie gali pateikti originalų vadovą. Ar ieškote savo Beper P204FER005 Lygintuvas vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Beper Lygintuvai vadovai
Daugiau Lygintuvai vadovų

Dažnai užduodami klausimai apie Beper P204FER005 Lygintuvas

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.