Vadovas Adler AD 1349 Virdulys

Vadovas

5

12. Current water temperature indicator

13. Water set temperature indicator "SET"

BEFORE FIRST USE

Fill the kettle with water three times to the maximum level, boil it, and pour it out. To remove any factory smell (see section: basic

operation).

*By holding down the button (10) for 3 seconds, the kettle sound will be turned off and the crossed-out loudspeaker icon (3) will appear on

the display.

*To change the temperature from ˚F to °C, hold the button (7) for 3 seconds.

BASIC OPERATION - Heating the water in the range of 40 °C - 100 °C

1. Place the base (D) on a stable, flat, and heat-resistant surface.

2. Fill the kettle with water so that the water level is below the maximum level on the water level indicator inside the kettle.

3. Remember to close the kettle with the lid (A) after filling, otherwise, the kettle will not turn off automatically after the water boils.

4. Plug the power cord into a 220-240V ~ 50/60Hz grounded socket.

5. Place the kettle on the base (D).

6. Press the button on the knob (1), and the light on the knob will start flashing, the LCD display (4) will display the current water

temperature (12), the "SET" indicator (13) will indicate the set temperature and the cooking indicator (6) will light up. By default, the kettle

is set to a temperature of 100˚C.

7. By turning the knob (11) left or right, you can set the temperature in the range from 40°C to 100°C in 5°C steps.

5. After setting the appropriate temperature, press the button on the knob (1), the light on the knob will stop flashing, the indicator (6) will

start flashing, and then the heater will start heating the water, and the current water temperature (12) will be displayed on the LCD display

(4). The water temperature will increase to the previously set temperature, "SET" indicator (13).

6. After reaching the set water temperature, the kettle will automatically turn off, and you will hear the "di-di" sound twice (you can turn off

the sound by holding the button (10) for 3 seconds). The light in the knob (1) will start flashing.

The LCD display (12) will show the set temperature, then after 5 minutes, the kettle will turn off automatically. The kettle will be turned on

again after pressing the button on the knob (1).

7. If you want to turn off the kettle before the water has finished boiling, lift it from the base (D) or press the button on the knob (1).

8. The kettle can be turned on again approximately 2 minutes after the last use.

ADVANCED OPERATION: HEATING WATER FOR COFFEE FOR TEMPERATURE:

91°C or 93°C or 96°C

To set the kettle to heat the water to 91°C or 93°C or 96°C, press the "MODE" button (10), and the indicator (2) will light up.

By turning the knob (11) left or right, you can set the temperature in one of the following options: 91°C, 93°C or 96°C.

After setting the appropriate temperature, press the button on the knob (1), the light on the knob will stop flashing, the indicator (6) will

start flashing, and then the heater will start heating the water, and the current water temperature (12) will appear on the LCD display (4).

The water temperature will increase to the previously set "SET" temperature (13).

After reaching the set water temperature, the kettle will automatically turn off and you will hear the "di-di" sound twice (you can turn off the

sound by holding the button (10) for 3 seconds).

The LCD display (12) will show the set temperature, then after 5 minutes, the kettle will turn off automatically. The kettle will be turned on

again after pressing the button on the knob (1).

If you want to turn off the kettle before the water has finished boiling, lift it from the base (D) or press the button on the knob (1).

You can start turning the kettle back on approximately 2 minutes after it was last used.

KEEP WARM FUNCTION

After setting the appropriate temperature (see section: basic/advanced operation), press the "keep warm" button (7), the lamp on the

button will light up and the LCD display (4) will show the clock (8) and "HOLD" indicator, to set the time turn the knob (11) left or right, the

time can be set in the range from 10 minutes to 2 hours, in 10-minute intervals.

After setting the time, press the button on the knob (1) to turn on the kettle.

After reaching the set temperature, the kettle will enter the keep warm function, the indicator (5) will light up on the LCD display (4) and

the clock will start counting down the early set time. The kettle will heat the water cyclically to the set temperature for a predetermined

time.

To stop the keep-warm remove the kettle from the base (D) or press the button (7) - the light will turn off.

SECURITY

The device is equipped with an automatic overheating fuse, the fuse will turn on when used with insufficient water. Always make sure that

the amount of water in the device is above the minimum level. If the fuse trips, turn off the kettle by pressing the button (1) for 3 seconds,

then remove the plug from the power socket and let the kettle cool down for 5-10 minutes. Then fill the kettle with water and turn on the

device and it will work normally.

Turning on an empty kettle or one filled with insufficient water will automatically turn off the device. In such a case, wait several minutes,

then pour the appropriate amount of water and turn the kettle on again.

Įvertinimas

Daugiau apie šį vadovą

Suprantame, kad puiku turėti popierinį savo Adler AD 1349 Virdulys vadovą. Visada galite atsisiųsti vadovą iš mūsų svetainės ir atsispausdinti patys. Jei norite turėti originalų vadovą, rekomenduojame susisiekti su Adler. Jie gali pateikti originalų vadovą. Ar ieškote savo Adler AD 1349 Virdulys vadovo kita kalba? Pasirinkite pageidaujamą kalbą mūsų pagrindiniame puslapyje ir ieškokite modelio numerio, kad pamatytumėte, ar jį turime.

Specifikacijos

Visi Adler Virduliai vadovai
Daugiau Virduliai vadovų

Dažnai užduodami klausimai apie Adler AD 1349 Virdulys

Mūsų palaikymo komanda ieško naudingos informacijos apie produktą ir atsakymų į dažniausiai užduodamus klausimus. Jei dažniausiai užduodamuose klausimuose pastebėjote netikslumų, praneškite mums naudodamiesi mūsų kontaktų forma.

Susiję produktai

Vadovas

Adler AD 1283G Virdulys

Vadovas

Adler AD 1379 Virdulys

Vadovas

Adler AD 1282 Virdulys

Vadovas

Adler AD 1340 Virdulys

Vadovas

Adler AD 1283C Virdulys

Vadovas

Adler AD 1295 Virdulys

Vadovas

Adler AD 1277 Virdulys

Vadovas

Adler AD 1273 Virdulys

Susijusios kategorijos